|
|
Storage and Drying of Electronic Components
| |
Many
of the electronic components are sensitive for moisture, so
they should be stored in moisture barrier bags. After being
opened and some components are taken out, the bag should be
vacuumed and sealed again. If components that are not in bags
are stored in a room for more than 3 days, they must be dryed.
Best way to dry the components is in a Vacuum Chamber which
is manufactured for only this purpose. The temperature inside
the chamber is +70°C.
Best way to store the components which are in production, is
to keep
them in a low moisture chamber. |
|
Devices available from Testware
Drying
and Low Humidity Chambers manufactured by Totech
Europe BV
Wide range of different chambers for
drying and dry storage.
Models
Hyper Serie
O2 Serie
Totech
Vacuum Packing Machine
More
information (pdf)
Totech
Moisture Barrier Bags
More
information (pdf)
Testware Oy Low Humidity Chambers
and Rooms for storing components in production
Several sizes with different temperature
ranges available
AmeriVacS
Vacuum sealers with protection gas manufactured by
4 different sizes available
AVN-20
AVS-20
Advantek
Moisture Barrier Bags
Several sizes and thicknesses available
Ideal thickness is 6,5 mils = 0,165 mm
Drylok moisture barrier bags |
|
|
